Introduction to plastic fasteners
Plastic fasteners for the beginning of the
installation of fastening fasteners used in connection, a wide range of uses,
in the car constitute the four plates are large-scale use. The main types are
divided into body fasteners, interior fasteners, chassis and engine fasteners
and electrical fasteners, including body fasteners mainly for all types of nuts
and blocking pieces, interior fasteners mainly for all types Standard plastic
parts, chassis engine to all types of pipe clamp-based, electrical part of the
wiring harness fastening belt and line guard-based.
Plastic fasteners a wide range of different
forms, the role of the principle of roughly the same, that is, through the role
of fasteners, the two separate parts of the original fixed connection. as the
picture shows:
At present, commonly used materials to
nylon 6, nylon 66, POM-based, mainly to consider the physical properties of the
first indicators of high and low temperature performance, the second is the
impact of performance, the third is the ability to stretch, because the need to
consider Product life and ease of installation, and help reduce body weight.
The product is suitable for chassis, engine
and interior：
Plastic fasteners are ubiquity
1. Plastic sleeve
Suitable for assembly of silent hinges; for
assembly tolerances DIN h6-H7; assembled bearing clearance is 1% of shaft
diameter; resistant to dirt, climate and most chemicals.
2. Plastic gears
Plastic gears are made of wear-resistant,
self-lubricating polyoxymethylene (POM) plastic for injection molding without
the need for additional lubricants after installation. They can be used in
environments up to 95 ° C.
3. Plastic strain relief clip
Plastic stress relief clip is also called
plastic power cable buckle, can greatly save the relevant production costs,
eliminating some additional installation costs and steps, installation, two
power cord buckle through the attached hinge or plastic cable easily folded
closed , So that the cable clasp, the installation of the power cord buckle
must be perpendicular to the surface to be installed, and then use a common
force clamp clamped power cord buckle above the specially designed groove will
be placed smoothly into the installation location card position Available in a
bullet-shaped, streamlined head design, the product is free from the
traditional complex and cumbersome tape guards in a limited space. The product
is securely fastened and holds wires and cables to protect them from being
pulled And reverse the irregular sharp edges from the edge of the damage panel,
the product in line with UL strict fire-retardant certification, black thermal
stability of nylon injection molding, the maximum temperature of 105 degrees
Celsius.
4. Plastic damper
Plastic dampers can be used to control the
movement of flap, distribution box doors and appliance doors, etc., is a silent
mobile silicon dampener improved products, simple installation time-saving,
there are 8 kinds of torque to choose from, with self-lubricating material No
additional oil, maintenance-free.
5. Plastic grease cap
Plastic grease cap in accordance with
DIN71412 and NEN2435 standards, providing yellow and red two colors,
anti-fouling, and lubrication points can be marked.
