Mould to stick mark

Mould to stick mark

Mould labeling is a different from the traditional direct screen printing, heat shrinkable label, the non-drying label of new label packaging form,

At the beginning of the domestic large-scale application.

Mould labeling is mainly used for the material such as PP, PE, PET blow molding and injection molding products. Namely before blow molding, injection molding has been printed mould

Labeling in blow and injection molding cavity, when blowing, injection mold on, through the effect of high temperature and high pressure in the inside mould making mould labeling on the special product, with the bottle or plastic surface, when the mold opens, a has beautifully printed bottles or note a one-time finish.

Mould stick mark advantages:

1. Enhance the anti-counterfeiting function of products directly, can conform to high standard enterprise brand protection needs more.

2. Mould labeling, can do laser printed, aluminum plating, such as special effects, make the product packing grade is greatly increased.

3. The form is novel and attractive, fall off not easily broken, waterproof, prevent oil, mouldproof

4. Increase the health, safety of packaged products, put an end to the secondary printing and labeling of environmental pollution.

5. The comprehensive cost significantly lower than the traditional label and direct screen printing and environmental protection.

Mould stick mark application industry;

1. Beauty, hairdressing products packaging container

2. Medical and health care products packaging container

3. The food and beverage packaging container

4. Oil powder, such as liquefied products packaging containers

5. Cooking oil, soy sauce, vinegar and other spices packing container

6. Wash basin, barrel, cup, etc. The adornment of the commodity.

more  information www.chinamoldmaker.org  www.cnmoulding.com